1. Open the program control cabinet, turn on the main switch and the following several water pump switches. At this time, the geomantic bulb and the cold fog began to work.
2. Open the amplifier and DVD, and close the door of the program-controlled cabinet.
3. The switch on the panel of the control cabinet controls the fountain water pump. Turn on the power amplifier and DVD and turn on the switch.
4. The black rotary button on the control panel controls the water level of the fountain. The volume can also control the height of the fountain.
5. Turn on the underwater lights when operating at night.
6. When closing the fountain, first turn off the switch on the panel, open the cabinet, turn off all water pump switches, turn off DVD and power amplifier, and finally turn off the main switch.

matters needing attention:
1. Keep the water in the pool clean.
2. Except for the switch used for the above operation, the program control cabinet shall not be changed without permission.
3. After the cold fog is opened, there is no need for any operation in the cold fog machine, so it is not allowed to debug it without permission.
4. The engine oil should be changed every 500 hours. The engine oil should be ordinary automobile oil.
5. Before freezing, clean up the accumulated water in the mist cooler to avoid freezing damage to the pipes, nozzles and fog cooler
6. When cleaning up the accumulated water in the mist cooler, turn the main water supply switch in the water supply well first